How To Install A CCTV Camera At Home: A Step-By-Step Guide

Install A CCTV Camera At Home

There were, -11 percent of homeowners who did not report break-ins to police and 23 percent who did not report property damage because they believed the situation was unimportant. In the case of property damages, 12 percent of victims felt helpless.

Since these crimes continue to be prevalent, homeowners must invest in additional security measures such as motion detectors and CCTV cameras. Security cameras do not just deter burglars from attacking your property. However, they help homeowners to report incidents to the authorities and determine the perpetrator.

Security camera systems today can be swiftly installed without professional help. All you have to do is determine the suitable placements to maximize the cameras’ capabilities.

How to Install CCTV Cameras?

Determine the place on the wall where the bracket will be attached to the mount. Then, drill the holes, insert the raw plugs, and screw the bracket. For wired cameras, you will need to connect the wire through the wall to connect it to the monitor source. Make sure the holes are wide enough to allow the wire through.

  • Attach the camera and secure it. Connect the power cord to the socket. Specific wireless cameras operate without power cables, but you must recharge the batteries of their cameras.
  • Place your DVR (Digital Video Recorder) in a secure location. We recommend keeping it in an enclosed compartment to safeguard the surveillance information. Instead of DVRs, Wireless CCTV cameras utilize NVRs (Network Video Recorders), which you can set up similarly.
  • Create the cable paths between the cameras and the DVR. If you’re using indoor cables, place them beneath carpets, next to skirting boards, or close to ceiling cornices. Outdoor cameras should employ wire moldings to help ensure the cables remain steady and safe from damage.
  • Ensure that the network cable is connected to the router. IP cameras require the Cat 5 or Cat 6 cable, while analog HD cameras need a BNC cable and a DC connector.
  • Attach each camera’s connection to either your DVR or NVR. Connect your DVR to the monitor where you would like the video feed to appear. We suggest using HDMI for the monitor to get a more excellent resolution.
  • Once everything is connected and running, you can check the video feed to determine whether the cameras are taking pictures of the intended area. Adjust their angles to accommodate blind spots. If one camera isn’t working, examine the network connections and clips.

The wired cameras can be challenging to install, mainly if you are a novice and need to learn more about cables. To make it easy and quick installation, consider Wireless cameras, which are easy to install by security camera fitters. They rely on wireless receivers to stay connected, so you don’t need complicated cable management. Be sure each camera is within the hub’s reach.

Where to Place CCTV Cameras?

The initial step in installing security cameras is to determine their locations. Apart from the cameras’ reach, you must consider their cables’ length. They need to be sufficient to get to the nearest power outlets. You can opt for a wireless electronic system if you do not want to handle all the wires.

Here are the best locations for security cameras at home:

  • Side, front, and back entrances: 

CCTV installers may direct your camera towards the sidewalk or walkway to record the faces of all approaching your door. To prevent individuals from throwing things at or messing up your camera, put a wire enclosure around it, or put it on the second floor. French or patio doors can be particularly vulnerable to burglaries, so have cameras installed in these areas.

  • Ground-floor windows:

Windows that don’t have a view of the street are typical openings for burglars. In addition to CCTV cameras, use smart window locks to provide security measures.

  • Garages and detached structures: 

The burglars target separate buildings because most homeowners need to consider security for these spaces. If Wi-Fi can’t connect to these locations, you could opt for a range extender or camera that doesn’t require access to the Internet.

  • Backyard: 

Ensure your outdoor cameras cover all your backyards to remove blind spots. You can also enhance your security cameras in your backyard with lighting to deter burglars from coming close to your home.

  • Second Floor: 

Secure your second floor’s main entrance with an indoor camera to protect your possessions. It’s an excellent method to provide more evidence of video if you need to report a crime.

By Master Henry

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts